27
26
User manual
Pandora DXL-0100L/0101L service-security system
Glossary of terms
AlarmStudio – an installation helper software that is to be installed on a Windows PC (preferably,
laptop). AlarmStudio allows changing any parameters in the system and provides installation tips for
particular cars. Easy to use and intuitive, AlarmStudio is required for in-depth and highly customized
installation. Installation without AlarmStudio, although entirely possible, may be incomplete and
lacking in functionality.
Base Unit – it is a small box that acts as a ‘brain’ of the system. It contains a printed circuit
board, sensors and supplementary devices like 3D accelerometer and sockets for connecting it to
car systems. Powerful processor unit and ingenious algorithms allow for hundreds of programmable
parameters, accessible via AlarmStudio (and via VALET button for some).
Car alarm system – a set of third-party electronic devices that are installed in a car body and
connected to its electric and data networks in order to provide enhanced security.
Car service-security system – same as car alarm system but with more service options, e.g.
telemetry, remote engine start, various control options.
Channel – a name we use in our service-security systems to indicated a combined position and
function of particular output socket and corresponding wiring.
Original security system – a built-in security system that is present on some car models. You can
set up particular logic of interaction between this system and ours – control over it or a slave mode.
Telemetry – in car service-security systems is a combined capability to gather, process and
convey to user various data regarding the car – temperatures, voltages, fuel level, sensor data, etc.
Timer channel – a term we use in our service-security systems to name channels that activate
additional options or accessories (e.g. seat heating, light path, additional block relays). Any channel
(output) can be set as timer channel, that can be activated from the remote, or incorporated into
scheduled and sequential routines. To assign timer channels, use AlarmStudio.
System modules layout
Ask the installer to mark system’s modules on the picture provided. This information can be
important for diagnostics in case system malfunctions.
Base unit
VALET button
Blocking radio relay
Additional sensor
GSM aerial
Automatic start module
GPS receiver
1
2
3
4
5
6
7
