Pando PVMB 15-7CR, Manual

Page: 187 / 286

Pando Pando
Integralcooking Integralcooking
EN
Pando
EN
6.1. HUMIDITY CONTROL
CLEANING OF THE UNIT
CARE AND MAINTENANCE
WARNING:
Failure to unplug the appliance during servicing or cleaning may result in electric
shock or personal injury.
Humidity Control
The appliance is equipped with a system to maintain the correct humidity level. In extremely dry
ambient conditions, you may need to add a little water in the humidity box provided.
Fill the small plastic tank (humidity box) to ¾ of its capacity with water, and insert it into the
guides on the top shelf of the appliance. Check the water level regularly and top up as
necessary.
Make sure that the tank is correctly positioned on the top shelf guides to avoid the possibility of
water spillage.
Cleaning the unit
Switch off the appliance, unplug it and remove all objects, including the shelves and rack.
Wash interior surfaces with a solution of warm water and baking soda. The solution should be
about 2 tablespoons of baking soda per litre of water.
Wash the shelves with a mild detergent solution.
Wring excess water from the sponge or cloth when cleaning any area of the controls.
The sealing gasket around the door must be cleaned regularly to prevent discolouration and
prolong the service life. Use clean water. After cleaning the sealing gasket, check that it still
provides a tight seal.
Wash the outdoor furniture with warm water and mild liquid detergent. Rinse thoroughly
and dry with a soft, clean cloth.
Do not clean stainless steel with steel wool. We suggest that you use an all-in-one stainless
steel cleaner to clean stainless steel. Always clean in the direction of the grain.
184