AT-OME-ST31A
41
Solution Setup and Configuration Guide
7. Under
System Settings
, click the
Control Type
drop-down list and select
IP
.
9.
Scroll down to the bottom of the page and locate the
RS-232 / IP commands
section.
10. Click the
Manufacturer
drop-down list to select the manufacturer of the device that is being controlled.
8. Locate the
TCP/IP Settings of Controlled Device
section and enter the following information:
a. IP Mode
If the device does not require a login, then set this drop-down value to
Non-Login
. If the device requires
login credentials, select
Login
from the drop-down list. Note that if
Login
is selected, then the
Username
and
Password
fields will need to be populated with the required login credentials.
b. IP Address
Enter the IP address of the device to be controlled.
c. Port
Enter the port in this field.
d. Username
This field is only required if
IP Mode
is set to
Login
. Enter the username login credential in this field.
e. Password
This field is only required if
IP Mode
is set to
Login
. Enter the username login credential in this field.