AT-OME-ST31A
39
Solution Setup and Configuration Guide
13.
Continue fine-tuning the device selection by clicking the
Products
and
Model
drop-down lists. Once all fields
have been set to the proper values, the AT-OME-ST31A will populate the command fields with the proper values,
based on the selected device.
NOTE:
If the manufacturer/model is not listed in the drop-down lists, then the command fields can
be entered manually. Consult the User Manual for the display/sink device to obtain the correct
command format.
14. Click the
Send
button to test each command.
a.
Enter the hexadecimal command string is the correct field. An example
power-on
command for a display
might be:
\xBE\xEF\x03\x06\x00\xBA\xD2\x01\x00\x00\x60\x01\x00\x0D
This command would be entered under the
Set command
field, under
ON
. Consult the documentation for
the display for the correct command strings.
b. Make sure the command string is terminated correctly. In most cases, a CR (carriage return) should be
specified. In the example above, “\x0D” is the hexadecimal value for a carriage return.
HEX Command Strings
ASCII Command Strings
a.
Enter the ASCII command string is the correct field. An example
power-on
command for a display might be:
PWON
This command would be entered under the
Set command
field, under
ON
. Consult the documentation for
the display for the correct command strings.
15. Click the
Save
button to commit all changes.