AT-OME-ST31A
18
Device Operation
Controlling Audio
The AT-OME-ST31A provides complete control over both audio muting and audio input sources. Audio muting can
be controlled on both HDMI and HDBaseT outputs. Analog audio can also be embedded on the HDBaseT or HDMI
outputs using a 3.5 mm mini-stereo cable.
Audio Output Muting
De-Embedding Audio
1.
Open the desired web browser and enter the IP address of the AT-OME-ST31A.
2.
Log in as the
admin
user with the required credentials. The factory-default username and password for the
admin user are listed below:
Username: admin
Password: Atlona
3. Click
A/V Settings
in the menu bar.
4.
Locate the
Audio
section.
5. Click the toggle switch for the desired output. To mute the audio output on the
HDBaseT Output
, click this
toggle switch to the
OFF
position. To re-enable the audio for that output, set the toggle switch to the
ON
position.
1.
Open the desired web browser and enter the IP address of the AT-OME-ST31A.
2.
Log in as the
admin
user with the required credentials. The factory-default username and password for the
admin user are listed below:
Username: admin
Password: Atlona
3. Click
A/V Settings
in the menu bar.
IMPORTANT:
The AT-OME-ST31A will only de-embed two-channel LPCM audio. Down-mixing
mulitchannel audio to two-channel audio is not supported.