User Manual For CYCLONE
FX
Programmers
75
Figure 8-5: Changing Storage Area
A blue image is not committed, disconnecting from the Cyclone before the “Apply Changes” button
is clicked will discard any changes not committed.
Erasing an image can be done by clicking on the trashcan icon at the left of the image, it can also
be done by selecting the image and click the DELETE key on the keyboard. The “Apply Changes”
buttons must be clicked for any changes to the Cyclone to take place.
To format the external memory card click on the “Format External Card” button. This will erase all
image information stored in the external card.
From this tab a user can also access the image properties of images in the Cyclone. Just right click
on the image then click on “View Image Properties” and a window with public image properties will
pop up.
Figure 8-6: Image Properties Window
Properties like the image name, the voltage settings, image CRC, and all current serial numbers
can be viewed from this window. Use this feature to make sure your image settings are correct or
check that the serial numbers change accordingly.
