P&E CYCLONE FX, User Manual

Page: 118 / 139

User Manual For CYCLONE FX Programmers 113
11.6.2.1 Background Color Codes
Figure 11-22 shows what the color codes typically represent on the program screen:
███ , ███ , or ███ Clicked to Select or Double-Clicked to delete
███ Indicates Selected ASCII character values
███ Indicates Selected hex character values
███ Indicates a Failure
███ Indicates a Success
███ Needs attention to continue or indicates inverted bounds
███ Marked by Ctrl-C for Ctrl-V copying
███ Indicates the Cursor position
Figure 11-22: Background Color Codes
11.6.2.2 Font Color Codes
Figure 11-23 shows what the font colors represent on the program screen:
XXX Normal character font color
XXX Font color selected for Bulk Copying, or to indicate an Option Open Option
Figure 11-23: Font Color Codes
11.6.3 Enabling/Disabling A Barcode Scanner
To enable a barcode scanner that is connected to the Cyclone FX ’s USB Extension Port, go to:
Menu -> Configure Cyclone -> Configure USB Host Device -> Enable USB Scanner
This setting is persistent; the scanner will be powered and turned on when the Cyclone is powered,
until the scanner is disabled. To disable the barcode scanner, select:
Menu -> Configure Cyclone -> Configure USB Host Device -> Disable
A
U A lphabetic U pper
case
[A-Z] [41-5A] Y
A
L
A lphabetic L ower
case
[a-z] [61-7A] Y
A
B A lpha B etic [A-Z][a-z] [41-5A] [61-7A] N
A
N A lpha N umeric [0-9][A-Z][a-z] [30-39] [41-5A] [61-
7A]
N
N
U NU meric [0-9] [30-39] Y
H
X H e X adecimal [0-9][A-F][a-f] [30-39] [41-46] [61-
66]
N
M
T
M ul T iple Multiples of above Multiples of above N
Table K-1. Allowed Character Types
Type Type Name Ascii Range Hex Range Contiguous