Panavision SSR manual ---
17
V1.0
2. Position - Current position, starting with a value of zero at the beginning of the first recording
made on the SSR. This mode is indicated by a
POS
box on left of the Main TC.
3. Timecode - Current timecode associated with the currently displayed frame. This mode is
indicated by a
TC
box on the left of the Main TC HH;MM;SS:FF display.
4. Timecode generator
.
This is the TC set in the System Menu. This mode is indicated by
TCG
box on left of the Main TC. The only occasion you will see TCG is on the HOME screen, when
you push the Encoder jog knob to see the EE video signal.
M a i n T C D i s p
M a i n T C D i s p
You can select 1 of 4 settings:
1.
Remain
ing capacity
2.
Position
3.
Timecode
4.
Auto
– In record the Main TC will display remaining capacity, in playback the Main TC will
display playback Position or Timecode. The playback mode (Position or Timecode) depends on
the setting of the Sub TC Display discussed below.
S u b T C D i s p
S u b T C D i s p
The sub timecode display is the smaller-sized timecode right above the Main TC.
You can select either:
1.
Position
- Current position of the SSR starting from zero at beginning of first recording.
2.
Timecode
– The timecode associated with the current frame.