Panavision SSR manual ---
15
V1.0
5.3 VIDEO MENU
The Video Menu is reached by pushing
F2
from any menu
M O N O U T
M O N O U T
Normally leave on
AUTO
. This menu item determines the HD-SDI 422 video output for the
“HDSDI” BNC (next to TC). See section 2.0
Select between
AUTO
,
LinkA
,
LinkB
and
444
modes.
444
mode converts 444 to 422.
This setting defaults back to AUTO when the SSR is power cycled.
Do not select LinkA or LinkB MON OUT when using the 444 format, as this will create a faulty
signal.
T G
T G
Enable and select video test signal generator. Select between
Off
,
CB
(color bars),
PATH
ological,
Ramp
and
Black
.
(The grey and magenta PATHological signal is used to check the serial digital interface)
S D M O D E
S D M O D E
Select the aspect ratio on the SD OUT BNC (next to GEN). See section 2.0
Select between
Letterbox
,
Edge crop
or
Squeeze
to fit the 16 by 9 frame in the SD (standard
definition) 4 by 3 aspect ratio.
S D F O R M A T
S D F O R M A T
Select the format of the composite video output for the SD OUT BNC:
NTSC
or
PAL
.
M O N I T O R
M O N I T O R
Select the video output for the LINK A, LINK B and HDSDI monitor outputs in non-play modes.
Select between
PB/EE
and
PB
.
In
PB/EE
mode, playback is selected when PLAY, SHUTTLE, FWD or REWIND and input video
is seen when in STOP. If there is no video input then
EE
mode will not be selected.
In
PB
mode, playback video is always seen on the output, even when the SSR is stopped, in
which case a still frame is displayed.
F1
System
Settings
F2
Video
Settings
F3
Display
Settings
F4
Audio
Settings