30
8 Settings and Operations
(continue)
(3) When one of number of arc ignition times and
actual cutting time reaches the set value, after
cutting operation finishes, by using
【
the cutting
torch monitoring warning setting
「
p06
」
】
on the
submenu, operating status are as follows:
·
When
「
P06
」
is
「
0
」
「
the cutting torch monitoring
」
LED blinks. After
that, cutting can be executed.
·
When
「
P06
」
is
「
1
」
When digital display window displays
「
E40
」
,
there is no output.
(4) After installation of new electrode and cutting
tip, please execute the required reset operation
as (1) on
【
the cutting torch monitoring
selection
】
of submenu.
8.6.2 The confirmation method for
monitoring number of times and
duration of the cutting torch
●
The confirmation method for setting number of
times and duration
Select
【
the cutting torch monitoring number of
times
「
p04
」
】
or
【
the cutting torch monitoring
time setting
「
p05
」
】
of submenu. If pressing
the DECIDE button to enter menu item,
【
the
cutting torch monitoring number of times
「
p04
」
】
of submenu shows the set number of
times.
“【
the cutting torch monitoring time
setting
「
P05
」
】
of submenu shows the set
cutting time.
blink
blink
