46
■
IPv6 network
[Manual]
Select "On" or "Off" to determine whether or not to man-
ually extract IPv6 prefix information from an IPv6 com-
patible router.
On:
Enter IPv6 address manually.
Off:
Manual entry of IPv6 address will become unavail-
able.
Default:
Off
[
IP
address(
IPv6
)]
When "On" is selected for "Manual", it is necessary to
enter IPv6 address manually.
Enter an address that is not being used for the other
devices.
■
Common
[DNS]
Select "Auto" or "Manual" to determine whether or not to
use the DNS. When "Manual" is selected, it is neces-
sary to configure the settings for the DNS.
When using the DHCP function, it is possible to obtain
the DNS address automatically by selecting "Auto".
Refer to the network administrator for further information
about the settings.
Default:
Manual
[Primary server address], [Secondary server
address]
When "Manual" is selected for "DNS", enter the IP
address of the DNS. Refer to the network administrator
about the IP address of the DNS.
[HTTP port]
Assign the port numbers independently.
The following port numbers are unavailable since they
are already in use.
Available port number:
1 - 65 535
Default:
80
<Port numbers already in use>
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162,
995, 10 669, 10 670
[Line speed]
Select the line speed for data transmission from the fol-
lowing. It is recommended to use the default setting
"Auto".
Auto:
Line speed will be applied automatically.
100M-FULL:
100 Mbps full-duplex
100M-HALF:
100 Mbps half-duplex
10M-FULL:
10 Mbps full-duplex
10M-HALF:
10 Mbps half-duplex
Default:
Auto
[FTP access to camera]
Select "Allow" or "Forbid" to determine whether to allow
or forbid the FTP access to camera.
Default:
Forbid
[Bandwidth control(bit rate)]
Select the total bit rate for data transmission from the
following.
Unlimited/64 kbps/128 kbps/256 kbps/512 kbps/
1024 kbps/2048 kbps/4096 kbps
Default:
Unlimited
Notes:
• When selecting "64 kbps", select "Off" for "Audio
mode" on the "Audio" tab. (
☞
page 28)
• Select "128 kbps" or a faster rate to carry out the live
transmission of JPEG images and the FTP periodic
image transmission simultaneously.
• When "Bandwidth control(bit rate)" is set low, taking
a picture using the one shot button may not function
depending on the use environment.
In this case, select "QVGA" for "Image capture size"
of "JPEG" on the [JPEG/MPEG-4] tab (
☞
page 20)
or set "Image quality" of "JPEG" lower.
