[Line speed]
Select the line speed for data transmission from the following. It is recommended to use with the default
“Auto”.
•
Auto:
Line speed will be applied automatically.
•
100M-Full:
100 Mbps full-duplex
•
100M-Half:
100 Mbps half-duplex
•
10M-Full:
10 Mbps full-duplex
•
10M-Half:
10 Mbps half-duplex
•
Default:
Auto
[FTP access to camera]
Select “Allow” or “Forbid” to determine whether to allow or forbid the FTP access to camera.
•
Default:
Forbid
[Easy IP Setup accommodate period]
Select “20min” or “Unlimited” to determine how long the network setting operation using the Panasonic “IP
Setting Software” can be allowed since the camera starts up.
•
20min:
The camera information display and the network setting operation using the Panasonic “IP Setting
Software” are allowed for 20 minutes since the camera starts up.
•
Unlimited:
The camera information display and the network setting operation using the Panasonic “IP
Setting Software” are allowed without time limitation.
•
Default:
Unlimited
Note
•
When using Wearable Camera Agent Software, select “Unlimited” for [Easy IP Setup accommodate
period].
•
Refer to the network administrator for the addresses of each server.
•
The port forwarding function changes a global IP address to a private IP address, and “Static IP
masquerade” and “Network Address Translation (NAT)” have this function. This function is to be set in
a router.
Operating Instructions
37
8 Configuring the network settings [Network]
