8 Configuring the network settings [Network]
The network settings can be configured on the “Network” page.
8.1 Configure the network settings [Network]
Display the “Network” page. (
®
page 14, page 16)
The following information is required to configure the network settings. Contact the network administrator.
•
IP address
•
Subnet mask
•
Default gateway (when using the gateway server/router)
•
HTTP port
IPv4 network
[DHCP]
Select “On” or “Off” to determine whether or not to use the DHCP function.
Configure the DHCP server not to assign the same IP addresses used for the other cameras and PCs whose
IP address is unique. Refer to the network administrator for further information about the settings of the server.
•
Default:
Off
Operating Instructions
35
8 Configuring the network settings [Network]
