31
Note:
• When shooting in the following place or the following subjects, focus may not be adjusted
automatically. In this case, adjust the focus manually from the setup menu. Refer to the
Operating Instructions (included in the CD-ROM) for how to perform the manual focus adjust-
ment from the setup menu.
• Subj. with large illuminance change
• Subj. moving frequently
• Subj. with reflection or extra brightness
• Subj. with low illuminance
• Place where the front cover easily becomes dirty
• Subj. through a window
• Subj. with less contrast such as white wall
• Subj. with heavy flicker
•
If the 2x extra optical zoom is applied when "1280x960", "1280x720" is selected for the image capture
size, the image quality will be deteriorated because the effect of Extra Optical Zoom is not provided.
• When images in the near-infrared light area change from color to black & white, out-of-focus
may be occurred according to the nature of optical property. In this case, the focus can auto-
matically be corrected by selecting "Auto" or "Preset" for "Adjusting method" on the setup
menu (The focus will not automatically be adjusted according to the illumination level change
once the focus is corrected.) Refer to the Operating Instructions (included in the CD-ROM) for
how to set "Adjusting method" on the setup menu.
<WV-SW314>
FOCUS ADJUSTMENT
LOW
HIGH
.......|............
INDICATOR 775
BEST
PEAK HOLD 780
FOCUS
Focus ring
Zoom ring
Focus lock knob
Zoom lock knob
Focus assist button (F.A.)/
Extra optical zoom button
q
Loosen the zoom lock knob and the focus lock knob, then move them to adjust for the appro-
priate viewing angle of the target.
Note:
•
The focus may not be adjusted appropriately when the zoom ring is positioned at the "W"
(or "T") end. In this case, adjust the focus again by slightly moving the zoom ring to the direction of "T" (or "W").
Summary of Contents for WV-SW316L
Page 49: ...49 ...
