36
m
Remove the sunshield backside.
As illustrated, opening up the sunshield in both directions makes it easier to remove the rear
part of the sunshield.
•
When installing the camera to a ceiling, the rear part of the sunshield and the fixing screws
are not used.
Rear part of sunshield
Fixing screw x2
,
Mount the sunshield on the camera body with the 4 sunshield mounting screws after removing
the sunshield backside.
•
The sunshield is attached to the camera by inserting the protrusions on the rear cover of the
camera into the attachment holes on the rear part of the sunshield.
Rear part of sunshield
Protrusion
Attachment hole
IMPORTANT:
• Be sure to use the screws that were removed from the sunshield.
Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}
(This illustration represents WV-SW316.)
Summary of Contents for WV-SW316L
Page 49: ...49 ...
