Panasonic WV-SF448, Operating Instructions Manual

Page: 40 / 228

3.
Click the [Start] button to start recording images on the SD memory card. The SD recording status indicator
will light red (
®
page 18) while images are being recorded on the SD memory card.
The image saving interval can be configured on the [SD memory card] tab of the “Basic” page.
(
®
page 65)
4.
Click the [Stop] button to stop saving images on the SD memory card.
→
The SD recording status indicator will turn off.
5.
Click the [Close] button to close the window.
Note
•
Image data saved on Drive B can be obtained by executing “Access img.” on the [SD memory card]
tab and logging in from the user authentication window (
®
page 74).
The destination to save image data is a fixed directory on Drive B. Refer to “Directory structure of drive
B” (
®
page 224).
•
When the [Start] button is clicked immediately after the [Stop] button is clicked, saving of images may
not start. In this case, click the [Start] button again.
40 Operating Instructions
3 Record images on the SD memory card manually