Panasonic WV-S2500 Series Operating Instructions Manual Download Page 53

Page: 53 / 236

Note

•

If you click the [Next] button, the setting items in the screen are saved.

[Back] button

If you click the [Back] button, the alarm function type setup menu will be displayed. (

page 51)

Configure SD memory recording (JPEG) (JPEG recording setup menu)

The SD memory recording (JPEG) when an alarm is detected is configure in this section.

Refer to page 73 of 2.4.2 Configure the settings relating to the SD memory card [SD memory card]

for information about how to set the above screen.

[Next] button

If you select “Alarm output” in the alarm setup menu and click the [Next] button, the alarm output setup menu
will be displayed. (

page 54)

If you click the [Next] button in the alarm setup menu without selecting “Alarm output”, the mail setup menu
will be displayed. (

page 55)

[Back] button

If you click the [Back] button, the alarm function type setup menu will be displayed. (

page 51)

Configure SD memory recording (H.265 or H.264) (video recording setup

menu)

The SD memory recording (H.265 or H.264) when an alarm is detected is configured in this section.

[Audio recording]

Select On/Off to determine whether or not to record audio data.

•

On:

Saves audio data to videos (MP4 format).

•

Off:

Does not save audio data to videos (MP4 format).

Operating Instructions

2 Settings

Summary of Contents for WV-S2500 Series













































































































































































































































Search results

Summary of Contents for WV-S2500 Series

Reviews:

Brands by name

Popular brands

Panasonic WV-S2500 Series, Operating Instructions Manual

Search results

Summary of Contents for WV-S2500 Series

Reviews:

Brands by name

Popular brands