manualshive.com logo in svg

Panasonic WV-S2500 Series, Operating Instructions Manual

Share
Download
Panasonic WV-S2500 Series Operating Instructions Manual Download Page 195

•

If access often fails due to the change in the global address of router, set a smaller value for “Access
interval”.

Checking the information registered for the “Viewnetcam.com” service

It is possible to check if the camera has been registered for the “Viewnetcam.com” service. (

®

page 208)

2.9.6.2  When using “Dynamic DNS Update”

[Host name]

Enter the host name to be used for the Dynamic DNS Update service.

•

Available number of characters:

 3 - 250 characters

Enter in the form of “(host name). (domain name)”.

•

Available characters:

 Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the

hyphen (-).

•

Default:

 None (blank)

Note

•

Refer to the network administrator for further information about the available host names.

[Access interval]

Select the interval to access the Dynamic DNS Update service server to check the IP address and the host
name from the following.
10min/ 20min/ 30min/ 40min/ 50min/ 1h/ 6h/ 24h

•

Default:

 24h

Operating Instructions

195

2 Settings

Summary of Contents for WV-S2500 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands