manualshive.com logo in svg

Panasonic WV-S2500 Series, Operating Instructions Manual

Share
Download
Panasonic WV-S2500 Series Operating Instructions Manual Download Page 207

The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for
further information about the firmware upgrade.

[Model no.], [MAC address], [Serial no.], [Firmware version], [IP address(IPv6)], [Viewer
software installation counter], [Time past from the date of manufacture]

Information of each item will be displayed.

[Ext. software >>]

A link for the extension software screen is displayed.
Refer to our website (http://security.panasonic.com/kms/) for further information about extension software.

1.

Contact the dealer and download the latest firmware onto a PC.

IMPORTANT

•

A blank (space) cannot be used for the name of the directory where the downloaded firmware to
be saved.

2.

Click the [Browse...] button and designate the downloaded firmware.

Note

•

The latest firmware upgrade is posted on our website.

Operating Instructions

207

2 Settings

Summary of Contents for WV-S2500 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands