[E-mail subject]
Enter the E-mail subject.
•
Available number of characters:
0 - 50 characters
•
Use the camera title:
The camera title will be displayed in the e-mail subject.
•
Cause of alarm:
Adds the cause of alarm to the E-mail subject.
[E-mail body]
Enter the E-mail body.
•
Available number of characters:
0 - 200 characters
•
Cause of alarm:
The cause of alarm %p% is added in the e-mail body. %p% is replaced by the cause of
alarm and sent.
–
For VMD alarm: “VMD”
–
For terminal alarm: Terminal name set in “Terminal 1”, “Terminal 2”, and “Terminal 3” of “Terminal
name”. (Example: If the name of Terminal 1 is “Terminal1”, it is “Terminal1”)
–
For command alarm: “CMD”
–
For audio detection alarm: “Audio detection”
•
Occurrence time:
The time of occurrence %t% will be added to the e-mail body. %t% will be replaced by
the time of occurrence of the alarm (HH:MM:SS) and sent.
•
Default:
–
Cause of alarm: Checked
–
Occurrence time: Checked
–
E-mail body: The %p% alarm was occurred at %t%.
Note
•
Notification E-mail will be sent with the message “The capacity of the SD memory card is full.” when
the SD memory card has become full, or “The SD memory card cannot be detected.” when mounting
of the SD memory card failed.
•
Entering alternative text into the E-mail body automatically adds the event or time when an alarm
occurs.
Alternative text cause of alarm: %p%, occurrence time: %t%
(Examples of use)
After setting the following characters in the E-mail body, there is a VMD alarm occurrence at the time
19:13:24.
E-mail body settings: %p% alarm occurred at %t%.
Sent E-mail body: “A “VMD” alarm occurred at 19:13:24.”
When the body of the email is empty, the language that the email is sent in is determined by “Menu
language” of “Basic”. If “Japanese” is specified, email is sent in Japanese. If another language is
specified, email is sent in English.
[Terminal 1 (Up to 10 characters)]
Enter the name of Terminal 1 used in the cause of alarm in the e-mail body.
•
Unavailable characters:
" &
•
Default:
Terminal1
[Terminal 2 (Up to 10 characters)]
Enter the name of Terminal 2 used in the cause of alarm in the e-mail body.
•
Unavailable characters:
" &
•
Default:
Terminal2
[Terminal 3 (Up to 10 characters)]
Enter the name of Terminal 3 used in the cause of alarm in the e-mail body.
•
Unavailable characters:
" &
160
Operating Instructions
2 Settings
Summary of Contents for WV-S2500 Series
Page 235: ...Operating Instructions 235 Notes ...
