manualshive.com logo in svg

Panasonic WV-S2500 Series, Operating Instructions Manual

Share
Download
Panasonic WV-S2500 Series Operating Instructions Manual Download Page 198

Up to 5 schedules can be set.

1.

Select an action to be assigned to the schedule from “Schedule mode”.
“Off” is selected at the default.

•

Off:

 No action will be taken for the respective schedule.

•

Alarm permission (Terminal alarm 1, 2, 3):

 Alarm input (terminal alarm) will be allowed during the

period of the schedule.

S11x2

 

S11x1

 

S15x1

 

S25x1

 

S221x

 

S21x1

•

Alarm permission(Terminal alarm 1):

 Terminal 1 alarm input will be allowed during the period of the

schedule.

S11x2

 

S11x1

 

S15x1

 

S25x1

 

S221x

 

S21x1

•

Alarm permission(Terminal alarm 2):

 Terminal 2 alarm input will be allowed during the period of the

schedule.

S11x2

 

S11x1

 

S15x1

 

S25x1

 

S221x

 

S21x1

198

Operating Instructions

2 Settings

Summary of Contents for WV-S2500 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands