background image

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

N0300-0

YWV8QA5394AN

Printed in Japan

N

19

Panasonic's WV-CP160E colour digital camera introduces a new level of high picture quality
and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having
752 horizontal pixels (picture elements), and digital signal processing LSIs.  This model
offers cutting-edge technology for advanced video surveillance. This VP multiplex camera
can be connected with specified monitor by single coaxial cable.

PREFACE

Model No.

WV-CP160E

Colour CCTV Camera

Operating Instructions

(Lens Option)

Su

per D

ynam

ic

The serial number of this product may be found
on the top of the unit.
You should note the serial number of this unit
in the space provided and retain this instruction
as a permanent record of your purchase to aid
identification in the event of theft.

Model No. 

Serial No. 

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

Wij verklaren als enige aansprakelijke, dat het product
waarop deze verklaring betrekking heeft, voldoet aan de
normen of andere normatieve documenten, overe-
enkomstig de bepalingen van Richtlijn 89/336/EEC.

Vi erklærer os eneansvarlige for, at dette produkt, som
denne deklaration omhandler, er i overensstemmelse
med standarder eller andre normative dokumenter i følge
bestemmelserne i direktiv 89/336/EEC.

Vi deklarerar härmed värt fulla ansvar för att den produkt
till vilken denna deklaration hänvisar är i överensstäm-
melse med standarddokument, eller andra normativa
dokument som framställs i EEC-direktiv nr. 89/336.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota
tämä ilmoitus koskee, noudattaa seuraavia standardeja
tai muita ohjeellisia asiakirjoja, jotka noudattavat direkti-
ivin 89/336/EEC säädöksiä.

Vi erklærer oss alene ansvarlige for at produktet som
denne erklæringen gjelder for, er i overensstemmelse
med følgende normer eller andre normgivende doku-
menter som følger bestemmelsene i direktiv 89/336/EEC.

We declare under our sole responsibility that the product
to which this declaration relates is in conformity with the
standards or other normative documents following the
provisions of Directive EEC/89/336.

Dichiariamo sotto nostra esclusiva responsabilità che il
prodotto a cui si riferisce la presente dichiarazione è con-
forme agli standard o altri documenti normativi ottemper-
anti alle disposizioni della direttiva CEE/89/336.

The exclamation point within
an equilateral triangle is intend-
ed to alert the user to the pres-
ence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.

The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is interned to alert
the user to the presence of
uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.

Summary of Contents for WV-CP160E













Reviews: