Panasonic WORKIO DP-8035 Operating Instructions Manual Download Page 63

Page: 63 / 196

Internet Fax

Features

Search
letter(s)

Searched address

Search the Global directory
services (LDAP).

Search the Local address book.

Confirm
the destinations.

Enter the subject.

SALES DEPT

[email protected]

PANASONIC SALES

1234

PANAFAX

[email protected]

Address

: Edit Address for manual Email addressing

: Delete the selected address

• Email addresses, and fax numbers can be searched.
• Select “

Local

” to return to the address book search screen.

• If there are more than 100 matches, a dialog box opens

asking you if you want to continue new search. Select “

Yes

”

to continue searching. To abort the search with 100 matches,
select “

”.

• A message appears if an error occurs while searching.
• To add the found Email Address into the address book, select

“

Add to Local

”. Enter the entry name, and then select “

”.

Select desired field button,
and confirm destinations.

PANASONIC

QUALITY DEPT

Address (Up to 1,000 stations)

Email address
(Up to 70 stations)

• To cancel a choice, select the same destination again.
• For transmission to additional destinations, continue pressing the relevant keys.
• Select “

DESTINATIONS

” to confirm your designated destinations.

• The subject will not be

printed when sending for
InternetFax.

Summary of Contents for WORKIO DP-8035





































































































































































































Search results

Summary of Contents for WORKIO DP-8035

Reviews:

Related manuals for WORKIO DP-8035

Brands by name

Popular brands

Panasonic WORKIO DP-8035, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-8035

Reviews:

Related manuals for WORKIO DP-8035

Brands by name

Popular brands