337
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
Important Note!
The Default setting of
Fax Parameter No. 177 “XMT FILE TYPE”
for this machine is
“2: PDF”
, as PDF
has become the industry standard for exchanging documents from computer to computer (Scan-to-Email
feature).
However, this PDF format cannot be used for Internet Faxing (i.e. from an Internet Fax machine to an
Internet Fax machine) as current Internet Fax Specifications do not support PDF file format. Internet
Faxing requires TIFF-F file format. If your customer’s requirements are mainly Internet Faxing, please
change the
Fax Parameter No. 177 “XMT FILE TYPE”
to
“1: TIFF/JPEG”
.
If your customer uses both Internet Fax and Scan-to-Email and needs to switch file formats on the fly,
please explain to them how to use the
Select Mode (F8-6) “XMT FILE TYPE/NAME”
for individual
transmissions. After the transmission is completed, the machine returns to its Default setting.
Refer to the Operating Instructions (For Facsimile and Internet Fax/Email) included on the CD.
(15) Install the
Hardware Key
into one of the three
available connectors (CN67, CN68 or CN69) on
the SC PC Board.
Note:
The connectors are keyed, to prevent damage to
the SC PC Board, install the Hardware Key as
illustrated. Do not force the Hardware Key into the
connector if facing the wrong way.
(16) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(17) Plug the
AC Power Cord
and turn the Power
Switch on the Right Side of the machine to the
ON position.
(18) Reconnect the
Telephone Line Cable
if it was
disconnected.
(19) Execute Parameter Initialize by following the
steps below.
a) Press “
FAX/EMAIL
” key.
b) Press "
FUNCTION
" and then "
7
" keys.
c) Press “
MONITOR
” four times, then press “
∗
(TONE)” to enter the “
SERVICE MODE
”.
d) Press “
6
“ key or “V”, ”/\” arrow keys to enter “
6
RAM INITIALIZE
“.
e) Press “V”, ”
/\
” arrow keys to enter
"
PARAMETER INITIALIZE
".
f) Press “
START
” key. Wait approximately 10-20
seconds, the unit displays "
COMPLETED
",
then the unit will return to Service Mode.
g) Turn the Power Switch on the Right side of
the machine to the
OFF
and back to the
ON
position to enable the parameter settings.
(20) Update the firmware using the enclosed
firmware CD
. Refer to section 8.1 Service Notes
of this manual.
(21) Install the Internet Fax/Email Software into the
PC with the Operating Instructions by following
the prompts of the Installation Wizard.
Summary of Contents for Workio DP-1520P
Page 98: ...98 SEP 2004 Ver 1 2 DP 1520P 1820P 1820E DETAIL A 28 35 31 32 33 34 30 29 ...
Page 464: ...464 SEP 2004 Ver 1 2 DP 1520P 1820P 1820E memo ...
Page 495: ...memo ...
Page 496: ...DZZSM00257 ...
