Panasonic Workio DP-1520P, Service Manual

Page: 202 / 496

202
SEP 2004
Ver. 1.2
DP-1520P/1820P/1820E
5.1.7. F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
25 Fax Transmit Count Total count of Fax transmitted.
26 Fax Receive Count Total count of Fax received.
27 Fax Print Count Total count of Fax printed.
28 Total OPC Rotation Time Total Time of OPC Rotation.
29 A4/LT Count Total count of A4 / Letter Print.
30 A4R / LETTER R Count Total count of A4-R / Letter-R Print.
31 A3 / Ledger Count Total count of A3 / Ledger Print.
32 B4 / LEGAL Count Total count of B4 / Legal Print.
99 All Counter Clear All counters are cleared.
F8 Mode
No. Item Remarks
00 Exp. Lamp Replacement When replacing the exposure lamp.
Procedure:
a) Press the Start key to move the exposure lamp to
the position (approx. 250 mm from the optics
home position) where it can be replaced.
b) To return the optical system to the home position,
press the CLEAR key.*
01-05 Not Used
06 Error Log Print/View a) Each time the arrow key is pressed, the machine
errors or paper jam codes stored in memory are
displayed, beginning with the oldest code.
Note:
Only the 30 most recent codes are displayed.
07 Error Log Clear a) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
F7 Mode
No. Item Remarks