52
Function
00
PRINTER SETTINGS
Prints the printer settings.
PRESS SET TO PRINT
01
COMPLETION TIME
Sets the job completion time setting.
180SEC
1-999SEC
02
PAGE PROTECTION
Selects whether to enable automatic
1:OFF
compression when the received data exceeds
the page memory capacity.
(This is accomplished by reducing resolution,
and/or deleting pixels to fit the data onto the
available page memory, then print it out.)
When the setting is in the "OFF" position, upon
exceeding the page memory capacity, the print
job is deleted and an Error message is displayed.
1:OFF / 2:ON
03
ERROR PAGE PRINT
Selects whether to print the error page.
2:ON
1:OFF / 2:ON
04
SPOOL FUNCTION
Selects whether to enable the spool function.
2:ON
1:OFF / 2:ON
05
TEXT PRINT
Selects whether to print the text page only.
2:ON
1:OFF / 2:ON
06
PS CONFIGURATION
∗
1
Prints the PS configuration page.
PRESS SET TO PRINT
07
FONT LIST PRINT (PCL)
∗
2
Prints the PCL font list.
PRESS SET TO PRINT
08
FONT LIST PRINT (PS)
∗
1
Prints the PS font list.
PRESS SET TO PRINT
09
MAILBOX DATA HOLD
∗
3
Selects the automatic holding time frame for the 7 DAYS
mailbox data.
Infinity / 1 DAY / 2 DAYS / 3 DAYS / 4 DAYS /
5 DAYS / 6 DAYS / 7 DAYS
10
DELETE MAILBOX
∗
3
Selects whether to delete All the mailbox data or
only the data Before the time frame selected in
the "09 Mailbox Data Hold" setting.
1:ALL / 2:BEFORE
11
PRINT QUEUE DEL
Selects whether to disable the Key Operator's
2:KEY OP.
Password (authorization) requirement to delete
the print queue.
1:FREE / 2:KEY OP. (Operator)
12
APPLETALK ZONE
∗
1
Inputs a AppleTalk zone name.
The following Parameter Settings require the input of the Key Operator Password:
■
Printer Settings (For Key Operator)
No.
Modes
Function
Initial
Setting
∗
1 Available only when the optional Multi Page Description Language Controller Module is installed.
∗
2 Available only when the optional Printer Controller Module is installed.
∗
3 Available only when the optional Hard Disk Drive Unit is installed.
