40
Making Copies
Other Features
■
Job Build and SADF Mode
Special originals (like thin paper, etc.) can be
fed from the ADF Tray and copied continuously
using the Job Build and SADF Mode.
NOTE:
Set the Copier Setting No. 12 (SADF
DEFAULT) to “OFF” position in
advance. (See page 51)
Thin paper: minimum 55
g
/m
2
2
1
For ADF
For i-ADF
Place one Original at a
time or up to 50
∗
sheets
(80
g
/m
2
)
∗
30 sheets/B4, A3
Select desired settings
Example:
To make 5 sets of sorted copies of
80 sheets of originals. (A4 size)
2
1
For ADF
For i-ADF
Place the first 50
sheets of originals
on the ADF Tray.
Select desired settings
50
80
1
51
80
1
Originals: 50 sheets
<1st scan>
Originals: Remaining
30 sheets <2nd scan>
1
st
and 2
nd
Scanned Data
are combined into one job.
5 sets of 80 sheets
sorted copies are
printed
NOTE
●
Job Build and SADF function cannot be combined with 2
1 and 2
2.
●
Concurrent Copying function cannot be used when the Job Build and SADF function is selected
to “ON” position in the Copier Setting No. 12 (SADF DEFAULT). (See page 51)
■
Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and
Image Memory (See page 59) to be installed)
1st job
1st job
2nd job
Reserve
Copy
2nd job
2
1
For ADF
For i-ADF
Select desired settings
or
