Panasonic WJHD309A - DIGITAL DISK RECORDER Network Set Instructions Download Page 67

Page: 67 / 115

Screenshot 4

The window for selection of the event channel/number
will be displayed.

Step 4

Click the respective [SETUP] button for the desired
event channel/number to be set.

Screenshot 3

The event program menu will be displayed.

Step 3

Click the respective [SETUP] button for the desired
event to be set.

Screenshot 5

The setup menu for the event action will be displayed.

Step 5

Perform the settings for each item.
Refer to page 68 for further information about the set-
tings for each item.

Step 6

Click the [SET] button after completing the settings, and
close the windows (the event program menu, the win-
dow for selection of the event channel/number, the
setup menu for the event action) by clicking the [

] but-

ton at the top right of the window.

Summary of Contents for WJHD309A - DIGITAL DISK RECORDER




















































































































Panasonic WJHD309A - DIGITAL DISK RECORDER, Network Set Instructions, Page: 67 / 115

Search results

Summary of Contents for WJHD309A - DIGITAL DISK RECORDER

Reviews: