manualshive.com logo in svg

Panasonic WJHD309A - DIGITAL DISK RECORDER, Network Set Instructions, Page: 11 / 115

Share
Download
Panasonic WJHD309A - DIGITAL DISK RECORDER Network Set Instructions Download Page 11

Screenshot 1

Start just after the PC is started up.

Step 1

Start up the web browser.

11

Screenshot 2

The web browser will start up and the set web site will
be displayed.

Step 2

Enter the IP address set to this unit in the address box,
and press the enter key.

Important:

• Refer to a system administrator for the set IP

address of this unit. 

• It is impossible to access this unit from a PC without

a registered IP address when "ON" is selected for
"Host Authentication" on the "System" menu.
Refer to a system administrator for further informa-
tion.

• Do not attach "0" before the numbers when entering

the IP address.

Example

Correct: 192.168.0.50
Wrong: 192.168.0.050

Display the operation window

How to display the operation window

Start up the PC and operate this unit using the installed web browser.
The operation window will be displayed using the following procedure.

Summary of Contents for WJHD309A - DIGITAL DISK RECORDER




















































































































Reviews:

No comments