background image

109

n

Select OK using the arrows button and press the SET
button.

Notes: 

• The start time and end time can be set in 15 min-

utes intervals.

• To copy a timetable that is set for a different day of

the week, select "Copy the Other Time Table" and
select a day of the week by rotating the jog dial in
step 3.
Then, move the cursor to the "day of the week" box,
press the arrows button (

B

) and select a day of the

week by rotating the jog dial. After selecting, move
the cursor to OK and press the SET button.

[Screenshot 5]

The settings are applied to the selected timetable and the
timetable for all the days of the week will be displayed.

m

Move the cursor to the time zone of the day of the week
to which the REC program is to be assigned using the
arrows button.

,

Rotate the jog dial to select a desired REC program/
Event program.
(Rotating the jog dial changes the displayed REC pro-
gram.)
REC program will be displayed with different colours.

Yellow:

REC program 1/Event program 1

Green:

REC program 2/Event program 2

Pale purple:

REC program 3/Event program 3

Indigo blue:

REC program 4/Event program 4

It is possible to display the assigned REC Program/
Event Program window (pages 105 and 107) by press-
ing the SET button.
Repeat steps 7 and 8 to assign REC program to other
timetables.

.

Move the cursor to OK using the arrows button and
press the SET button.

The REC program/Event program will be assigned
to the selected time zone and the selected
timetable window will be closed.

Note:

When the SET button is pressed after moving the

cursor to CANCEL in step 9, the settings will be
canceled and the selected timetable window will be
closed.

[Special Days] Perform the settings for
recording programs for special days 

Assign timetables to special days aside from other days of
the week. Timetables for special days can be set for up to
30 days.
Perform the settings to specify dates as special days and
apply the recording schedule to the special days.

Schedule

System

Display

Comm

Switcher

SETUP MENU

LIVE

Maintenance

Recording

Time Table

REC Program

Event Program

Special Days

Event

1
2
3
4
5
6
7
8
9

10
11
12
13
14
15

M
M
M
M
M
M
M
M
M
M
M
M
M
M
M

1
--
--
--
--
--
--
--
--
--
--
--
--
--
--

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

SUN

--
--
--
--
--
--
--
--
--
--
--
--
--
--

16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

M
M
M
M
M
M
M
M
M
M
M
M
M
M
M

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D

--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

1
--
--
--
--
--
--
--
--
--
--
--
--
--
--

DATE

MODE

DATE

MODE

Schedule

System

Display

Comm

Switcher

SETUP MENU

LIVE

Maintenance

Recording

Time Table

REC Program

Event Program

Special Days

Event

REC

PROG1

PROG2 PROG3 PROG4

EVT

PROG1 PROG2 PROG3 PROG4

MON

TUE

WED

THU

FRI

SAT

SUN

DAILY

EXT

OK

CANCEL

12AM

REC
EVT

REC
EVT

REC
EVT

REC
EVT

REC
EVT

REC
EVT

REC
EVT

REC
EVT

REC
EVT

6AM

12PM

6PM

12AM

Summary of Contents for WJHD309 - DIGITAL DISK RECORDER





































































































































































Reviews: