![background image](http://html1.mh-extra.com/html/panasonic/wjfs616-switcher/wjfs616-switcher_operating-instruction_3733295044.webp)
-42-
6. To display another playback picture, press the
FUNCTION
button.
The LED on the button starts to blink. Select the
channel you want to display by pressing the corre-
sponding
CAMERA
button.
7. To return to the camera picture multiscreen, press
the
MULTISCREEN SELECT
button.
To display the playback picture in Single Spot
mode,press the
VTR/CAM
button.
Note:
To return to the previous camera picture mul-
tiscreen, press the FUNCTION button while the
LED in the button is blinking.
2. Multi Still
Repeat the above procedure. Then proceed as
described in “Displaying the Camera Picture, 5.
Multi Still” on page 39.
Note:
You cannot still the displayed playback pic-
ture on the monitor screen.
NEAR
FAR
FOCUS
TELE
WIDE
ZOOM
VTR
CAM
SPOT
MULTI
SCREEN
CAMERA CONTROL
FUNCTION
The camera control is only available while the cam-
era picture is displayed in Single Spot on the select-
ed monitor screen and the LOCK switch is in OFF
position.
■
Camera Selection
1. Press the
SPOT
or
MULTISCREEN
SELECT but-
ton. The LED (green) on the button lights up.
2. Press the
VTR/CAM
button to
CAM
position (LED
off).
3. Press a
CAMERA (1 - 16)
button to display a
selected camera picture in Single Spot on the mon-
itor screen.
The LED on the selected CAMERA button lights up.
■
Controlling System
Accessories
1. Lens Control
1. Select the desired camera referring to the Camera
Selection procedure described above.
2. Press the
FOCUS
button and adjust the lens focus
to obtain a sharply focused picture while observing
the monitor.
If the specified camera with auto focus feature is
used, press both of these buttons simultaneously to
adjust the lens focus automatically.
3. Press the
ZOOM
button and adjust the lens zoom
to obtain the desired picture while observing the
monitor.