-31-
SEQ1(SPOT-SEQUENCE)SETUP 1 OF 2
AUTO SKIP OFF
DWELL TIME 2SEC
STEP CAM PRE TIME STEP CAM PRE TIME
1 1CH - 2SEC 9 9CH - 2SEC
2 2CH - 2SEC 10 10CH - 2SEC
3 3CH - 2SEC 11 11CH - 2SEC
4 4CH - 2SEC 12 12CH - 2SEC
5 5CH - 2SEC 13 13CH - 2SEC
6 6CH - 2SEC 14 14CH - 2SEC
7 7CH - 2SEC 15 15CH - 2SEC
8 8CH - 2SEC 16 16CH - 2SEC
Press the FUNCTION button to display the next
page, then press this button again to return to
the previous page.
2. Move the cursor to the channel you want to
edit, then press the SET button.
The cursor moves to the title area, and the square
cursor appears on the character table.
3. To select a character, move the cursor on the
desired character in the table by pressing the
Direction Arrow buttons.
4. Then press the SET button to pick up the char-
acter, and place it in the title area.
5. Repeat the above procedures 3 to 4 until the
title for a certain camera is completed.
6. If a wrong character is selected, press the
Increment (+) or Decrement (
−
) button to move
the cursor in the title area.
Note:
Press the (+) button to move the cursor
to the right, or press the (
−
) button to move
the cursor to the left.
Then press the SET button to overwrite the
character with the character selected in
the table.
7. Press the SETUP/ESC button to move the cur-
sor to the channel number area.
8. Repeat the above procedures 2 to 7 for the
rest of the cameras.
9. Move the cursor to the channel area, then
press the SETUP/ESC button to return to the
previous SYSTEM SETUP menu.
4. Camera Title Display Position
This item lets you select the camera title position to
be displayed on the Spot Monitor screen.
Refer to the Clock Position Setting on page 30 for
more details.
1. Move the cursor to TITLE POSITION, then
press the SET button. The position setting
menu appears on the monitor screen.
2. Move the title by pressing the Direction Arrow
Buttons.
Note:
The camera title and the clock are dis-
played on the same line of the Spot moni-
tor.
If the camera title position is moved to
upward or downward, the clock is moved
to that position at the same time.
3. Press the SETUP/ESC button to execute the
selection and return to the previous SYSTEM
SETUP menu.
5. Sequence Setup
This item lets you program the sequence pattern
for Spot or Multi Sequence.
You can either program a spot sequence (SEQ1) or
two multi sequences (SEQ2, SEQ3).
●
Spot Sequence (SEQ1)
This item lets you program or edit a Spot
Sequence. Up to 32 steps can be assigned in the
table shown below.
You can also enable the Auto Skip function to skip
any steps where no video signal is present.
The duration of each step is determined by the
Dwell Time setting.
Initially, it is selected at the factory that 16 camera
pictures are displayed in succession.
1. Move the cursor to the SEQUENCE SETUP
parameter on the SYSTEM SETUP menu.
2. Select SEQ1 by pressing the LEFT or RIGHT
button, then press the SET button. The setup
menu shown below appears on the monitor
screen.
Auto Skip
1. Move the cursor to the AUTO SKIP parameter.
2. Select ON or OFF by pressing the LEFT or
RIGHT button.
ON:
Enables the auto skip function.
OFF:
Disables the auto skip function.
Step Assigment
1. Move the cursor to the step number you want
to edit in the CAM area by pressing the
Direction Arrow button.
2. Select the desired camera or playback channel
in the CAM area by pressing the Increment (+)
or Decrement (
−
) button.
1 - 16:
Camera Channel
P1 - P16:
Playback Channel
–:
Not Assigned
Note:
Any playback steps programmed in a
sequence are excluded from display on
the Spot Monitor and Multiscreen 2 Monitor
due to the way te system is designed.
3. Repeat the above procedures to assign other
steps.
