Panasonic WJ-NT104 Operating Instructions Manual Download

Page: 42 / 84

RESOLUTION

Set a pixel number (resolution) for images from the WJ-
NT104. The same value is applied for live images and
alarm images.

The factory default setting is 320x240 pixels

IMAGE QUALITY

Set the image quality for images from the WJ-NT104.
The same value is applied for live images and alarm
images.
The factory default setting is FINE.

FRAME SPEED CONTROL FOR PULL MODE

Set a frame speed for PULL mode.
1 is the highest frame speed. The higher the number,
the lower the frame speed.
The factory default setting is 3.

FRAME SPEED CONTROL FOR PUSH MODE

Set a frame speed for PUSH mode.
This mode is supported by the Netscape Navigator
browser only.
1 is the highest frame speed. The higher the number,
the lower the frame speed.
The factory default setting is 3.

OUTPUT DATA RATE CONTROL

Selecting a lower data rate reduces the possibility if a
network traffic jam.
The factory default setting is MAX.

CAMERA CONTROL SELECT

A camera control cable can be selected for each chan-
nel.
The factory default setting is COAXIAL.

Summary of Contents for WJ-NT104





















































































Search results

Summary of Contents for WJ-NT104

Reviews:

Related manuals for WJ-NT104

Brands by name

Popular brands

Panasonic WJ-NT104, Operating Instructions Manual

Search results

Summary of Contents for WJ-NT104

Reviews:

Related manuals for WJ-NT104

Brands by name

Popular brands