13
●
PC Setup
The factory default settings of the WJ-NT104 are as fol-
lows:
IP address
Netmask
Default gateway
192.168.0.10
255.255.255.0
192.168.0.1
For a client PC to access WJ-NT104 factory default set-
tings, set the IP address of the PC to 192.168.0.XX (XX
means any number from 2 to 254 except 10).
q
Connect the WJ-NT104 to the PC. (See page 12.)
w
Change the PC’s
TCP/IP
to match the factory default
settings of the WJ-NT104.
If your PC's OS is Windows95 or Windows98, proceed
as follows:
(1) Click the
Start
button, point to
settings
, and then
click
Control Panel
.
(2) Double-click
Network
.
(3) In the
Network
dialog box, click the
Configuration
tab.
(4) Choose
TCP/IP
, and then click the
[Properties]
button to display the
TCP/IP Properties
dialog
box.
(5) Specify an IP address as follows:
IP Address:
192.168.0.9
Subnet Mask: 255.255.255.0
e
Restart the PC.
Start the WWW browser, and select
[Do not use proxy
for address 192.168.0.10]
.
