23
u
Click the
[Configure...]
button to display the
RAS Server TCP/IP Configuration
dialog box.
i
Check
Entire network
in the
Allow remote TCP/IP clients to access
field.
o
Check
Use static address pool
under
Choose Cancel if you do not want to allow remote TCP/IP clients to dial in.
!0
Set
Begin
and
End
of an address.
The above dialog box setting applies in cases where addresses from 192.168.1.10 to 192.168.1.15 can be pooled.
Click the
[OK]
button.
!1
Set
Remote Access Admin
to grant remote access permission to users. To activate the
Remote Access Admin.
(1) Click the
Start
button, point to
Programs
, and then
Administrative Tools
.
(2) Click
Remote Access Admin
.
(3) Point to
Users menu
and then click
Permissions
to display the
Remote Access Permissions
window.
!2
Select a user to whom remote access permission is to be granted, and check
Grant dialin permission to user
.
!3
Click the
[OK]
button.
