56
PC (DOS/V)
RS-232C cable
WJ-NT104
Camera
■
Camera Menu Setup
This is software to control the camera menu of the WV-CS654 and CS854 (optional).
It allows a user to open the menu of a camera connected to the WJ-NT104 with a coaxial cable and select preset position
and other camera settings.
●
Operation
q
Connect the RS-232C port on the front of the WJ-NT104 and the RS-232C port of the PC with an RS-232C cable.
w
Set bits #7 and #9 of the MODE selector to ON position (leave the others on OFF), and then press the RESET button on the
front of the WJ-NT104.
e
Click the
Start
button, point to
Programs
and then
WJ-NT104 Utilities
. Click
Camera Setup
.
r
Select a channel under
Camera Select
.
t
Click the
[MENU ON/OFF]
button, to open the Menu.
Should it not appear, click the button repeatedly.
y
Use
[UP]
,
[DOWN]
,
[LEFT]
,
[RIGHT]
,
[ENTER]
, and
[ESC]
buttons to select a menu and execute a selected menu item.
For menu operations and setup refer to the operation manual of the connected camera.
u
The
[SPECIAL]
button is effective only when the cursor points to SPECIAL on the camera menu.
i
When the
[Camera Control]
button is depressed, a panel for Coaxial Camera Control appears.
PAN/TILT, ZOOM, and FOCUS control are selectable only in the “position setting menu.”
o
To exit from the setup, press the
[EXIT]
button.
!0
Return all switches on the MODE selector to OFF position and then press the RESET button on the front of the WJ-NT104.
This completes setup and return to the normal application mode.
