Panasonic VQT1T63 Operating Instructions Manual Download

Page: 55 / 210

- 55 -

Basic

∫

When [DELETE ALL] has been selected with the [FAVORITE]

(P150)

setting

The selection screen is displayed again. Select [DELETE ALL] or
[ALL DELETE EXCEPT

], press

to select [YES] and delete the pictures.

([ALL DELETE EXCEPT

] cannot be selected if no pictures have been set as

[FAVORITE].)

Note

•

Do not turn the camera off while deleting (while [

‚

] is displayed). Use a battery with a sufficient

power or the AC adaptor (optional).

•

If you press [MENU/SET] while deleting pictures using [DELETE MULTI], [DELETE ALL] or

[ALL DELETE EXCEPT

], the deleting will stop halfway.

•

Depending on the number of pictures to be deleted, it may take some time to delete them.

•

If pictures do not conform to the DCF standard or are protected

(P153)

, they will not be

deleted even if

[DELETE ALL]

or [

ALL DELETE EXCEPT

] is selected.

Summary of Contents for VQT1T63



















































































































































































































Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands

Panasonic VQT1T63, Operating Instructions Manual

Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands