Advanced (Recording pictures)
- 116 -
Note
•
If it fails to lock, AF area will flash in red, and disappear. Try to lock again.
•
AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [
Ø
] in [AF MODE] in that case.
•
It is not possible to set [
] in [STARRY SKY], [FIREWORKS], [PIN HOLE] or [FILM GRAIN] in
scene mode, or in the motion picture mode.
•
[
] does not work in AF tracking.
•
The focus range becomes the same as AF macro mode. [1 cm (Wide)/30 cm (Tele) to
¶
]
•
Dynamic tracking
function may not work in the following cases:
–
When the subject is too small
–
When the recording location is too dark or bright
–
When the subject is moving too fast
–
When the background has the same or similar colour to the subject.
–
When jitter is occurring
–
When using the zoom
∫
About AF area selection
You can select the AF area by pressing [FOCUS] when [
], [
ƒ
], [
Ø
] or [
Ù
] is
selected.
It is also possible to switch to AF area selection screen by pressing
1
when AF mode is
selected with
3
/
4
.
•
You can set from the quick menu.
When selecting [
ƒ
], [
Ø
] or [
Ù
]
1
Press
3
/
4
/
2
/
1
to move the AF area.
•
You can set to arbitrary position of the screen.
(It cannot be set to edge of the screen)
•
After moving the AF area, press [DISPLAY] to
return it to the centre.
2
Press [MENU/SET] to set.
When selecting [
]
1
Press
3
/
4
/
2
/
1
to select AF area as
shown in the figure to the right.
2
Press [MENU/SET] to set.
Note
•
The spot metering target can also be moved to match the AF area when using [
Ù
] in
[METERING MODE].
•
Position of the AF area will return to initial state when the camera is set to Intelligent auto
mode, When the power save mode is activated, or When this unit is turned off.
M
M
