Panasonic VQT1T63 Operating Instructions Manual Download Page 150

Page: 150 / 210

Advanced (Playback)

- 150 -

You can do the following if a mark has been added to pictures and they have been set as
favourites.

•

Play back only the pictures set as favourites. ([FAVORITE PLAY])

•

Play back the pictures set as favourites only as a slide show.

•

Delete all the pictures not set as favourites. ([ALL DELETE EXCEPT

])

Select [FAVORITE] on the [PLAYBACK] mode menu.

(P25)

∫

Cancelling all the [FAVORITE] settings

Select [CANCEL] on the screen shown in step

and then press [MENU/SET].

Press

to select [YES] and then press [MENU/SET].

Press [MENU/SET] to close the menu.

•

You cannot select [CANCEL] if not even one picture has been set as a favourite.

Note

•

You can set up to 999 pictures as favourites.

•

When printing pictures at a photo printing store, [ALL DELETE EXCEPT

]

(P54)

is useful so

only the pictures you want to be printed remain on the card.

•

You may not be able to set pictures taken with other equipment as favourites.

•

You can perform, check and cancel the settings of images as favourites using the

“

PHOTOfunSTUDIO-viewer-

”

bundled software on the CD-ROM (supplied).

[FAVORITE]

Press

to select [ON] and then press [MENU/SET].

•

You cannot set pictures as favourites if [FAVORITE] is set to

[OFF]. Also [

] will not appear when [FAVORITE] is set to [OFF]

even if it was previously set to [ON].

Press [MENU/SET] to close the menu.

Press

to select the picture and then press

•

Repeat the above procedure.

•

is pressed again, the favourite setting is cancelled.

Summary of Contents for VQT1T63



















































































































































































































Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands

Panasonic VQT1T63, Operating Instructions Manual

Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands