Panasonic VL-MV26, Installation Manual

Page: 80 / 122

6-2. Facility staff operations
Operation
6
Facility staff can use an extension telephone of a PBX to perform a variety of operations.
Operations available when not on a call
1. Dial the extension number assigned to the control box.
2. Enter the feature number according to the feature you want to operate.
3. Follow the voice guidance.
Operations available when on a call
Enter the feature number according to the feature you want to operate.
Room mode vs. reception mode
When the visitor call mode setting is set to room mode, lobby visitors can call a specific resident or room number, and
speak with residents directly. The resident can open the entrance door based on the conversation he/she had with the visitor.
When the visitor call mode setting is set to reception mode, calls from lobby visitors are directed to a reception terminal,
even if the visitor called a specific resident or room number. Visitors do not speak directly with residents. The reception
terminal user can open the entrance door based on the conversation he/she had with the resident.
Feature number Assignment
(room number) [ # ] Call the specified room number
[ * ] [ 1 ] Call lobby station 1
[ * ] [ 2 ] Call lobby station 2
[ * ] [ 3 ] Call lobby station 3
[ # ] [ # ] [ 0 ] [ 0 ] [ # ] Switch the visitor call mode to room mode
[ # ] [ # ] [ 0 ] [ 1 ] [ # ] Switch the visitor call mode to reception mode
Feature number Assignment
[ * ] [ 0 ] [ 0 ] [ 0 ] [ # ] Open the entrance door(s)
[ * ] (2-digit floor number) [ # ]
Open the entrance door(s) and allow the lift to
visit the specified floor
[ * ] [ # ] Repeat the voice guidance
75