User Parameters
29
Inst
alling
Y
o
ur
M
ach
ine
If the remote machine does not have a Character ID but has an ID Number, when sending or receiving, your
ID Number will appear on the remote machine's display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number. (Up to 20 digits)
NOTE
1. You may use
to enter a "+" character at the beginning of the ID number to indicate the
following digit(s) for your country code.
Ex:
+1 XXX XXX XXXX+1 for U.S.A. country code.
+81 X XXX XXXX +81 for Japan country code.
2. Your Fax Telephone Number must be set as your ID Number because it is required by the
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this Operating
Instructions)
Setting Your ID Number (Fax Telephone Number)
1
SET MODE (1-8)
ENTER NO. OR
∨∧
2
USER PARAMETERS?
PRESS SET
3
KEY OPERATOR ID
ENTER ID=
4
Enter the Key Operator Password.
KEY OPERATOR ID
ENTER ID=******
5
repeatedly until display shows;
FAX TEL NO
6
Enter your ID (up to 20 digits) by using the keypad and
press the
key to enter a space between
numbers.
Ex:
If you made a mistake, use
or
to move the cursor
one space beyond the incorrect number, press
and then re-enter the new number.
If more than 16 characters are entered, the left side
characters will scroll off the display.
FAX TEL NO
201 555 1212
7
7
1
Abbr Dial/Space
2
0
1
Abbr Dial/Space
5
5
5
Abbr Dial/Space
1
2
1
2
Clear
