manualshive.com logo in svg

Panasonic UF-4500, Operating Instructions Manual, Page: 183 / 200

Share
Download
Panasonic UF-4500 Operating Instructions Manual Download Page 183

FCC Notice for Users in USA

183

Appe

ndix

Your telephone company may make changes in it's facilities, equipment, operations or procedures that 

could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you 

an opportunity to maintain uninterrupted telephone service.
If you experience trouble with this telephone equipment, please contact the manufacturer's authorized 

service agency for information on obtaining service or repairs. The telephone company may ask that you 

disconnect this equipment from the network until the problem has been corrected or until you are sure that 

the equipment is not malfunctioning.

For protection against the risk of electric shock, always disconnect all cables from the wall outlet before 

servicing, modifying or installing the equipment.

This equipment may not be used on coin service provided by the telephone company nor connected to party 

lines. Connection to party line service is subject to state tariffs. (Contact the state public utility commission, 

public service commission or corporation commission for information.)

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of 

this equipment does not disable your alarm equipment. If you have questions about what will disable alarm 

equipment, consult your company or a qualified installer.

WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY

NUMBERS:

1. Remain on the line and briefly explain to the dispatcher the reason for the call.

2. Perform such activities in the off-peak hours, such as early morning

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or

other electronic device to send any message via telephone facsimile machine unless such message clearly

contains in a margin at the top or bottom of each transmitted page or on the first page of transmission the

following information:

1. Date and Time of transmission.

2. Identification of either business, business entity or individual sending the message.

3. Telephone number of either the sending machine, business entity or individual.

In order to program this information into your facsimile machine, you should refer to page 26 in this 

Operating Instructions to complete the steps.

Example of Header Format (DATE and TIME, LOGO, ID Number setting)

Recycling information

USA Only:  Disposal may be regulated in your community due to Environmental considerations.
For disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental or call 1-888-769-0149.

MMM-dd-yyyy 09:00             PANASONIC                            201 348 7000           P.01/05

1) Date and Time               2) LOGO                              3) ID Number

As an ENERGY STAR

®

 Partner, Panasonic has determined that this product 

meets the ENERGY STAR

®

 guidelines for energy efficiency.

This voluntary program specifies certain energy consumption and usage 
standards. This product will automatically "power down" after a specified 
period of non-use. The use of this ENERGY STAR

®

 compliant product will 

reduce energy consumption and ultimately benefit the environment.

The default functions can be adjusted depending on your office requirements. 
Please ask your Authorized Panasonic dealer for more details.

Summary of Contents for UF-4500









































































































































































































Reviews:

No comments