45
Using WebBrowser
(cont.)
NETWORK:
Sets a name for the network number.
IP:
DHCP* ON : If a DHCP server exists in the network to which the unit is connected, the IP address will automatically
be acquired.
DHCP OFF: If a DHCP server does not exist in the network to which the unit is connected, additionally set [IP
ADDRESS*], [SUBNETMASK*] and [GATEWAY*].
HOSTNAME:
Sets the hostname
SSID*:
If the mode is [INFRASTRUCTURE*], enter the SSID registered at the access point. If the mode is
[802.11 AD-HOC*], enter the same character string as that of SSID set on the computer to be connected.
MODE:
INFRASTRUCTURE: Connect through access point.
802.11 AD-HOC: Connect computer directly without access point.
* “Glossary” (See page 54, 55)
Detailed Network Settings Screen (1/3)
4
Detailed Network Settings Screen (2/3)
5
MODE:INFRASTRUCTURE
MODE:802.11 AD-HOC
AUTHENTICATION:
Sets the authentication system.
OPEN*
: When connecting using 802.11 AD-HOC or when the access point authentication system is OpenSystem
SHARED* : When connecting using 802.11 AD-HOC or when the access point authentication system is Shared Key
WPA-PSK* : When the access point authentication system is WPA-PSK
* “Glossary” (See page 55)
