36
Useful Functions
(cont.)
A snapshot of the current computer screen is transmitted to the display
Click [
] on the launcher.
4
Check the status indication on the launcher to make sure that transmission is
possible (check that the green lamp is lit).
3
One shot function
Cancel all live mode transmission.
1
Press the [INDEX] button on the remote control to turn the display screen into a full
screen display (the status when no index window is displayed).
If you press the [INDEX] button once or twice when index windows are displayed on the display screen, the screen will
switch over to a full screen display.
2
To display only the required parts of the computer screen as still images, you can use the one shot function to send the parts
which you have selected using the selective area transmission function.
Momentarily blanks the screen and mutes audio.
Click [
] on the launcher.
The image is turned off.
When sound is output, the sound also goes out.
1
Click [
] again.
The image comes back.
2
Shutter function
• The shutter function is available only in live mode or in multiple source live mode.
• It is necessary to set up the display when using this function. (See page 9)
Pointer function
You can change the shape of the pointer appearing on the display screen in live mode or multiple source live mode to one that
can be used for presentation purposes.
Click [
] on the launcher.
Quitting pointer function
Click [
] on the launcher again.
Note
Notes
