Panasonic TXPF42G20S Operating Instructions Manual Download

Page: 79 / 92

Link Functions

●

(Q-Link / VIERA

Link)

Advanced

Features available

■

(Using VIERA Link Menu)

Note

These functions may not work properly depending on the connected equipment.

●

Image or sound may not be available for the first few seconds when Input mode is switched.

●

Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier.

●

Read the manual of the equipment.

“HDAVI Control 5” is the newest standard (current as of December, 2009) for HDAVI Control compatible

●

equipment. This standard is compatible with conventional HDAVI equipment.

To confirm this TV’s version of HDAVI Control

●

“System Information” (p. 33)

Speaker control

Speaker Selection

You can control the theatre speaker with this TV remote control (point the remote control at the TV’s

signal receiver).

If you cannot operate, check the settings and the equipment

●

“Summary of Q-Link and VIERA Link features” (p. 72 and p. 73), “Preparations” (p. 75)

Access and control the speaker volume

Display “VIERA Link Menu”

Select “Speaker Selection”

VIERA Link Menu

Pause Live TV

Start

Direct TV Rec
VIERA Link Control

Speaker Selection

Start
Recorder
Home Cinema

select

Set to “Home Cinema” or “TV”

set

Home Cinema

■

Player theatre, Blu-ray Disc theatre or Amplifier will be

automatically turned on if it is in Standby mode and the sound is

from theatre speakers connected to the equipment.

Volume up / down

●

Mute

●

The sound of TV speakers is mute.

●

When the equipment is turned off, TV speakers will be active.

●

■

TV speakers are active.

Note

If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an

●

Amplifier, connect with HDMI cable and Optical digital audio cable (p. 73), and

then select “Home Cinema”. If your Amplifier has “HDAVI Control 5” function, you

can connect only with HDMI cable. In this case, connect your Amplifier to the TV’s

HDMI2 terminal.

To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an

HDMI cable from the DIGA Recorder to the Amplifier (p. 73).

Summary of Contents for TXPF42G20S





























































































Search results

Summary of Contents for TXPF42G20S

Reviews:

Related manuals for TXPF42G20S

Brands by name

Popular brands

Panasonic TXPF42G20S, Operating Instructions Manual

Search results

Summary of Contents for TXPF42G20S

Reviews:

Related manuals for TXPF42G20S

Brands by name

Popular brands