Panasonic TXPF42G20S Operating Instructions Manual Download

Page: 50 / 92

EXIT

BACK/

RETURN

You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various

ways.

Analogue TV programme cannot be recorded to the USB HDD.

●

The data broadcasting (MHEG, etc.), radio broadcasting and the periods without any signal will not be recorded.

●

Not all the programmes can be recorded depending on the broadcaster and service provider.

●

This TV supports USB HDD with capacity from 160 GB up to 2 TB.

●

If the remaining capacity of the USB HDD is run out, the recording cannot be done.

●

Regarding the performance, not all USB HDDs are guaranteed.

●

Check the USB HDDs that have been tested for the performance with this TV at the following website. (English

only)

http://panasonic.jp/support/global/cs/tv/

Caution

●

and all data (including the data from your PC, etc.) in it will be erased when you register it.

In order to use the USB HDD with your PC after you use it with this TV for recording, format the drive on your PC.

●

To format, refer to the manual of the PC. Please note that all data in the USB HDD will be erased when it is

formatted.

The data recorded to the USB HDD with this TV can only be played back on this TV. You cannot playback its

●

contents with another TV (including the TV of the same model number) or any PCs.

If your TV is repaired due to a malfunction, the registered USB HDD may not be available with your repaired TV.

●

USB HDD connection

Connect the USB HDD to the USB 1 or 2 port.

USB

cable

USB HDD

socket outlet

Be sure to connect the USB HDD to the

●

socket outlet.

Do not turn off or disconnect the USB HDD

●

during operation. It may cause malfunction

of the drive or damage the recorded data.

To remove the USB HDD safely from the TV

●

p. 51 and p. 55

Setting for USB HDD

before starting this settings. “USB HDD connection” (above)

Before the settings, be sure to turn on the USB HDD.

●

You cannot change the settings for the USB HDD while recording is in progress.

●

Please note that USB HDD will be formatted and all data in it will be erased when you register it.

●

Display the menu

Select “Setup”

Main Menu

Picture
Sound

Setup

access

select

Select “USB HDD Setup”

Setup Menu

1/2

Child Lock
DVB-C Tuning Menu
Language
Display Settings
Common Interface

Access

Off

USB HDD Setup

Link Settings

Off Timer

Timer Programming

access

select

Select “Device Setup” and set

USB HDD Setup

Device Setup

Access

One Touch Recording
REW LIVE TV

Off

180 minutes

access

select

USB HDD Recording

To return to TV

■

EXIT

Summary of Contents for TXPF42G20S





























































































Search results

Summary of Contents for TXPF42G20S

Reviews:

Related manuals for TXPF42G20S

Brands by name

Popular brands

Panasonic TXPF42G20S, Operating Instructions Manual

Search results

Summary of Contents for TXPF42G20S

Reviews:

Related manuals for TXPF42G20S

Brands by name

Popular brands