88
Problem
Actions
Screen
Chaotic image, noisy
Set “P-NR” in the Picture Menu (to remove noise). (p. 28)
●
Check nearby electrical products
●
(car, motorcycle, fluorescent lamp).
No image can be displayed
Is “Contrast”, “Brightness” or “Colour” in the Picture Menu set to the
●
minimum? (p. 28)
Blurry or distorted image
(no sound or low volume)
Reset channels. (p. 34 and p. 35)
●
Unusual image is displayed
Turn the TV Off with Mains power On / Off switch, then turn it On
●
again.
If the problem persists, perform “Shipping Condition” (p. 45).
●
Sound
No sound is produced
Is “Sound mute” active? (p. 8)
●
Is the volume set to the minimum?
●
Sound level is low or
sound is distorted
Sound signal reception may be deteriorated.
●
Set “MPX” (p. 29) in the Sound Menu to “Mono”. (Analogue only)
●
Unusual sound from the TV
When power is on, drive noise may be heard from inside the TV
●
(not a sign of faulty operation).
HDMI
Sound is unusual
Set the sound setting of the connected equipment to “2ch L.PCM”.
●
Check the “HDMI1 / 2 / 3 / 4 Input” setting in the Sound Menu.
●
(p. 30)
If digital sound connection has a problem, select analogue sound
●
connection. (p. 85)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Check the HDMI cable is connected properly. (p. 80)
●
Turn the TV and equipment Off, then turn them On again.
●
Check an input signal from the equipment. (p. 86)
●
Use an equipment compliant with EIA/CEA-861/861B.
●
FAQs
