background image

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note 

the model number and the serial number in the space provided below and retain this book, plus your 

purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft 

or loss, and for Warranty Service purposes.

Model Number

Serial Number

Printed in Japan

M0610-0

Web Site: http://panasonic.net

©

 Panasonic Corporation 2010

1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its 

Authorised Service Centre will perform necessary service on the product without charge for parts or labour if, in the opinion of 

Panasonic, the product is found to be faulty within the warranty period.

2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors 

or Dealers and only where the products are used and serviced within Australia or it's territories. Warranty cover only applies to service 

carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is 

requested.

3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as 

noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers 

normal domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect 

installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, 

thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised 

alterations), introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental 

use of the product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product.

4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:

  (a) Cabinet Part(s) 

(e) DVD Video, Blu-ray, or Recordable Discs

  (b) Video or Audio Tapes 

(f) Video / Audio Heads from wear and tear in normal use

  (c) SD cards or USB devices 

(g) Information stored on Hard Disk Drive, USB stick or SD card

  (d) User replaceable Batteries 

(h)  DTV reception issues caused by TV Aerial / Cabling / Wall socket(s) etc

5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover

  (a) Internet and or DLNA connection / setup related problems

  (b) Access fees and or charges incurred for internet connection

  (c) The use of incompatible software or software not specifically stipulated in the product operations manual; and

 (d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet 

or any other device.

6. If warranty service is required you should: 

  • Telephone Panasonic’s Customer Care Centre on 132600 or visit our website and use the Service Centre Locator for the 

name/address of the nearest Authorised Service Centre.

 • 

Send or bring the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase 

date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you.

7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or 

re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other 

ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of 

and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such 

installation, de-installation, re-installation or transit.

Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, 

coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone 

our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.
Unless otherwise specified to the consumer the benefits conferred by this express warranty are additional to all other conditions, 

warranties, guarantees, rights and remedies expressed or implied by the Trade Practices Act 1974 and similar consumer protection 

provisions contained in legislation of the States and Territories and all other obligations and liabilities on the part of the manufacturer 

or supplier and nothing contained herein shall restrict or modify such rights, remedies, obligations or liabilities.

 

Feb 2010

Panasonic Warranty

THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

If you require assistance regarding warranty conditions or any other enquiries,

please contact our Customer Care Centre via the Panasonic website www.panasonic.com.au or

by phone on 132 600. If phoning in, please ensure you have your operating instructions available.

Panasonic Australia Pty. Limited

ACN 001 592 187   ABN 83 001 592 187

Locked Bag 505, Frenchs Forest, NSW 2086

PRO-031-F11  Issue: 2.0  

18-02-2010

RQA0245

Summary of Contents for Viera TH-P54S20A





























































Reviews: