56
FAQs
Problem
Actions
Screen
Chaotic image, noisy
●
Change the setting of “P-NR” in the Picture Menu (to remove noise). (p. 24)
Check nearby electrical products (car, motorcycle,
●
fluorescent lamp).
No image can be displayed
Is “Colour” or “Contrast” in the Picture Menu set to the
●
minimum? (p. 24)
Blurry or distorted image
(no sound or low volume)
Reset channels (p. 30, 31).
●
Unusual image is displayed
●
Turn off the TV with Mains power On / Off switch, then turn it on again.
“Shop” appears on screen
at switch on
“Shop” was selected in “Auto Tuning” (p. 12)
●
Reset settings in “Shipping Condition” (p. 34), then select
“Home” in “Auto Tuning” (p. 12)
Sound
No sound is produced
Is “Sound Mute” active? (p. 10)
●
Is the volume set to the minimum?
●
Sound level is low
or sound is distorted
Sound signal reception may be deteriorated.
●
Set “MPX” in the Sound Menu to “Mono” (p. 25).
●
Unusual sound from the
display unit
When power is on, drive noise may be heard from inside the
●
display unit (not a sign of faulty operation).
HDMI
Sound is unusual
Set the sound setting of the connected equipment to “2ch L.PCM”.
●
Check the “HDMI1 / 2 / 3 Input” setting in the Sound Menu. (p. 25)
●
If digital sound connection has a problem, select analogue
●
sound connection. (p. 51)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Is the HDMI cable connected properly? (p. 43, 48, 49)
●
Turn Off the TV and equipment, then turn them On again.
●
Check an input signal from the equipment. (p. 52)
●
Use an equipment compliant with EIA/CEA-861/861B.
●
Digital TV
Note:
Digital TV reception is only as good as the antenna and the antenna cabling delivering
the DTV signals to the television. Reliable digital TV reception requires high quality, robust DTV
signals which can only be achieved when using a TV antenna and cabling designed for digital
TV reception.
Further reading please visit: http://www.digitalready.gov.au/publications.aspx where you can
●
download ‘The Digital TV Antenna Systems for Homes Handbook’ information pdf file.
For your safety, the antenna and cabling should be inspected / installed by a licenced installer
●
that should comply with Australian Standard AS1417.1 for Domestic installations or AS1367
for MATV installations.
Connecting devices such
as DTV recorder / PVR /
VCR etc that also require
an antenna connection to
the digital television
To maintain optimum antenna signal quality, use an ‘F’ type
●
TV signal splitter (as illustrated) when connecting two or
more devices to the same antenna socket.
Hint: Some degradation of the DTV signal may occur if you
●
are connecting the aerial through an external device (e.g.
DVD Recorder or Set Top Box). In this case it is better to
use a splitter and connect the aerial directly to both devices.
TV
DTV Recorder /
PVR / VCR
RG6Q Fly Lead
Out
in
‘F’ type
Antenna Splitter
Antenna Socket
Wall Plate
RG6Q Fly Lead
RG6Q Fly Lead