●
Is
Backlight
,
Contrast
,
Brightness
or
Colour
in the Picture Menu set to the
minimum?
Watching > For best picture > Basic settings
●
Check all required cables and connections are firmly in place.
Blurry or distorted image (no sound or low volume)
●
Reset channels.
Watching > Tuning and editing channels > Auto Setup
There may be a short black image
●
A black image is displayed to avoid picture distortion when an input signal
changes.
There may be red, blue, green and black spots on the screen
●
This is a characteristic of liquid crystal panels and is not a problem. The
liquid crystal panel is built with very high precision technology giving you
fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of red, green, blue or black. Please note this
does not affect the performance of the panel.
- 330 -
Summary of Contents for TX-75FXW785
